Product Description
Features:
●AC1200 dual-band Wi-Fi speeds
●8mb Flash and 128mb RAM
●4× Ethernet ports
●4× 5dbi high gain antennas
●VPN server and client
4-in-1 mode: Router/Access Point/Repeater/WISP
Product Weight: Approx. 130g
Color: White
Product size: L17*H13.5*W10.5cm
Adapter: British gauge Cable length 1 meter
CPU:MT762A+MT7612E
FLASH:64Mb
DDR:128MB
Wireless protocol:802.11b/g/n/ac
Wireless Rate:2.4G:300Mbps 5.8G:866Mbps
Wireless Power:2.4G:802.11N 16±1.5dBm 5.8G:802.11AC 14±1.5dBm
Antenna gain: 3dbi external omni-directional antenna
Ethernet port: 10/100 Mbps WAN*1 10/100 Mbps LAN*3
Power supply: DC 12V 1.0A
Indicator light: System light, LAN port light*3, WAN port light*1
Buttons: Restore Factory Settings Button
Operating modes: Dynamic IP mode Static IP mode, PPPoE dialing mode, AP mode, relay mode, bridge mode
Network Settings: LAN Settings, DHCP Settings, VPN Penetration
Wireless Settings: SSID Settings, Encryption Settings, Password Settings, Mode Settings, Channel Settings, Broadband Settings
Internet control: IP filtering, Mac filtering, URL filtering.
Advanced Settings: Virtual Server,DMZ Hosting,DDNS
System Management: Web Management, Time Setting, Password Change, Language Setting, Local Upgrade, Factory Restore, Reboot Device, Auto System Cleanup
Suitable temperature range
Suitable working temperature: 0℃-40
Suitable storage temperature:-20℃-70
3.2 Suitable temperature range
Suitable working humidity 20%-70
Suitable storage humidity 20%-70
Note: In order to maintain the service life of the product and ensure the working performance of the product, please use and store the product in strict accordance with the environmental requirements.
Installation steps:
Step 1: Power on the device, the router WAN port directly connected to the optical cat or community broadband
Step 2: When the machine enters the power-on state, use a cell phone or computer wifi search to connect WiFirouter-XXXXXXX Click to connect and it will automatically jump to the setup page.
Click to connect and it will automatically jump to the setup page. Select the interface language, enter the login password admin and click login.
(DXOOXXXX is the last 6 digits of the router's MAC address).
Note: If the interface does not appear after the cell phone clicks connect, please click "Ignore this network", then click "Close WIFI", and then click "Setup" to enter the setup page.
Close the WIFI, then open the WiFi and connect to the WIFI again. If this operation is still invalid, you can manually input the network number in the browser.
ht "192.168.11.1" in the browser.
300M Router
SSID:WiFirouter-xxxxxxxxx
1200M Router.
2.4G SSID:WiFirouter-oooooox
5.8G SSID:WiFirouter-5G-oooooxx
Step 3
-- Enter into the Configuration Wizard page, set the working mode (usually choose Dynamic IP). Set wireless name - select wireless
-- Encryption(choose encryption)-Set wireless password-Click save, wait for the router to reboot successfully, reconnect the router that can be normal Internet access.
Common Problems
1. When you use this product for the first time, you must enter the Setup Wizard to set and save the password before you can access the Internet normally, and it is recommended that the password should not be set to unencrypted to prevent others from rubbing the Internet and affecting your Internet experience.
2. If the Internet experience is poor, it may be caused by too much interference with the surrounding router signals, it is recommended to change the channel settings in the wireless settings interface to other channels to try.
3. How to choose the working mode
☆ If the carrier's optical cat has dial-up function, the router will choose dynamic IP mode, or AP mode.
☆ optical cat does not have dial-up function, you need to select the PPPOE mode, enter the broadband account number and password provided by the broadband operator and click Save to restart successfully to access the Internet.
★ This router has a relay function, you need to expand the existing WIFI signal coverage can choose the relay function.
4. equipment lag after prolonged use, you can try to power off and restart the device
5.If you forget the WIFI password, please long press the "RESET" button for about 5 seconds, the power light will flash, and you need to configure it again after restoring the factory settings.
Product list:
Router*1
Network cable*1
Power cord*1
Instruction manual *1
Payment
We accept PayPal only. If buyer want to delay the payment because of financial problem, please contact me by the ebay message within 3 days
Payment via PayPal (PayPal accepts all major credits/debit cards and eCheque)
ECheque payment will take 3-10 days to get clear, thus DELAYing the shipment.
© Copyright 2023. [4]